Good Water Resistance And Strong Strength Activated Alumina Balls For Dechlorination
Products Introduction:
Xi’an lvneng activated alumina for dechlorination is an adsorbent used to adsorb and remove chloride from Naphtha, natural gas, H2, N2, NH3, CO, CO2 & other feed gas in petrochemical. It is well efficient to remove chloride.
In the petrochemical production process, chlorine in feed gas could cause poisoning of a variety of catalyst and adsorbent, the failure of adsorbent & catalyst performance, severely corrosivity of devices & equipment, so chlorine removal is necessary. Usually, we adopt solid antichlor to remove chloride in the feed gas. activated alumina balls for removal of chloride is a high- efficient product to take off chlorine.
Technical index of activated alumina
| Activated Alumina Desiccant Typical Physical Properties |
| Items | Unit | Value |
| Crystalline Phase | | χ-ρ |
| Particle Size | mm | 3.0-5.0 | 4.0-6.0 | 5.0-7.0 | 6.0-8.0 |
| Appearance | - | White Sphere |
| Bulk Density | g/cm3 | 0.70-0.80 |
| Crush Strength | N ≥ | 150 | 180 | 200 | 230 |
| Specific Surface Area | m2/g | 300-330 |
| Pore Volume | cm3/g | 0.40-0.50 |
| Attrition Rate | wt% ≤ | 0.1 |
| Static Water Adsorption | wt% ≥ | 18 |
| LOI(1000℃) | - | 4-7 |
| AL2O3 | % ≥ | 94 |
| SiO2 | % ≤ | 0.02 |
| Fe2O3 | % ≤ | 0.02 |
| Na2O | % ≤ | 0.20 |
| The interval value of the indexes above are on the basis of the different grade of Activated Alumina Desiccant |
Characteristics of Activated alumina for removal of chloride:
1.Uniform size
2. Even and Uniform activity under high and low temperature
3.Uneasy movable active components & chlorine after the reaction
4.Wide application area
Storage:
Avoid moisture, avoid scrolling, throw and sharp shocking during transportation, rainproof facilities should be readied.
It should be stored in dry and ventilated warehouse to prevent contamination or moisture.
Product Tags:
|
|
Strong Strength Aluminum Oxide Desiccant Water Resistance For Dechlorination Images
|
